Sonolastic Np 1 Color Chart

Sonolastic Sealants Standard Colors

Service.The color of actual products may vary; perform final color matching with actual material.Sonneborn ® is not responsible for color matching when actu al material is not used. Sonolastic ® Sealant Systems TX 1NP 1 ™ •

www.bestmaterials.com

SONOLASTIC®NP 1

Color White, off-white, limestone, stone, tan, aluminum gray, hunter green, medium bronze, special bronze, redwood tan, tile red and black. ... or mineral wool •Suitable for water immersion Documented performance in wet areas •Low VOC content Meets VOC requirements in all 50 states SONOLASTIC ® NP 1 ...

www.homasote.com

SONOLASTIC® NP1™

SONOLASTIC ® NP1™ Polyurethane joint sealant DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION SONOLASTIC SONOLASTIC SONOLASTIC SONOLASTIC NP 1 NP 1 NP 1 NP 1 is a versatile moisture-curing high performance polyurethane sealant with permanent elasticity.

www.basf-cc.com.au

1017911 7 06

1. NP 2 ™ is generally considered a non-priming sealant, but special circumstances or substrates may ... and Sonolastic ® color pigment into Part A. 2. 1-1/2 gallon (5.67 L) unit: Transfer entire

www.buildingsystems.basf.com

SONOLASTIC®NP 1

Color White, off-white, limestone, stone, tan, aluminum gray, hunter green, medium bronze, special bronze, redwood tan, and black. ... or mineral wool •Suitable for water immersion Documented performance in wet areas •Low VOC content Meets VOC requirements in all 50 states SONOLASTIC ® NP 1 ...

www.epremier.net

SONOLASTIC®NP 2

SONOLASTIC ® NP 2 Multiple-component high-performance polyurethane sealant Description A three component gun-grade polyurethane sealant that producesa flexible ... Continue mixing with a slow-speed (500-600 rpm) drill and slotted paddle until color is uniform.

www.basf-cc.ae

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product name : SONOLASTIC NP1 Other name: None allocated Product code: Various Recommended Use: One-component, Polyurethane-based moisture curing gun grade sealant.

www.basf-cc.com.au

™ Multi-component self-leveling polyurethane sealant

Yield See page 3 for chart. PRIMER 733 450 linear ft (137 m) per pint for a 1/2" (13 mm) deep joint. ... B and Sonolastic ® color pigment into Part A. NOTE: Sonolastic ® color paks are not added to ... slopes over 12% use NP 2 ™ sealant (see Form No. 1017911).

www.buildingsystems.basf.com

SONOLASTIC®NP 2

Mixing 1. NP 2 ™ is a three-component system and must be thoroughly mixed before use. The oversize Part A container allows for the addition and mixing of Part B and Sonolastic ® color pigment into Part A. 2.1-1/2 gallon (5.67 L) unit: Transfer entire contents of Part B to Part A container using a spatula or ...

www.masonpro.com

SONOLASTIC®NP 2

Mixing 1. NP 2 ™ is a three-component system and must be thoroughly mixed before use. The oversize Part A container allows for the addition and mixing of Part B and Sonolastic ® color pigment into Part A. 2.1-1/2 gallon (5.67 L) unit: Transfer entire contents of Part B to Part A container using a spatula or ...

www.bestmaterials.com

Other sites you could try:

Find videos related to Sonolastic Np 1 Color Chart