MIL-DTL-81706B 25 October 2004 SUPERSEDING MIL-DTL-81706A 18 February 2002 MIL C 81706
If specified in the contract or order, contact marks shall be touched up with MIL-DTL-81706 material approved on QPL-81706 for the applicable type, class, ...
Pro−Seal 870 A−2 MS15 C233Chemical Coating (B−E−EX−F−P−V) MIL−DTL−81706 T1 C3.... Alodine 600 MS36 C234Sealing Compound (B−E−EX−F−P−V) MIL−S−29574 T1 B2 A.....
QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER DETAIL SPECIFICATION MIL-DTL-81706 CHEMICAL CONVERSION MATERIALS FOR COATING ALUMINUM AND ALUMINUM ALLOYS This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such ...
The Touch-N-Prep pens are approved per MIL-DTL-81706, Class 3, for protection against corrosion where low electrical resistance is required. "Do we have to apply two coats of conversion coatings?"
mil-dtl-81706a 18 february 2002 superseding mil-c-81706 30 june 1970 detail specification chemical conversion materials for coating aluminum and aluminum alloys
Henkel Surface Technologies ALODINE® T 5900 RTU Technical Process Bulletin Technical Process Bulletin No. 239582 This Revision: 04/12/2005 ALODINE® T 5900 RTU Conversion Coating Process for Aluminum 1.
Henkel Technologies, 32100 Stephenson Hwy, Madison Heights Michigan 48071. Phone: 800.521.6895 "The information presented herein is our interpretation of certain test results and field experience to date.
Approved to MIL-DTL-81706 and by major aircraft manufacturers including Boeing (BAC 5719). BENEFITS: Dry-in-place coating, elimination of hazardous rinse waters being generated. Arapid, ...
Other sites you could try:
Find videos related to Mil-dtl-81706