If individual is conscious, give milk or water to dilute stomach contents. Keep warm and quiet. Get prompt medical attention. Revision 30.05.2000 Page 1 of 4 Lokprep 65g.doc
Rotate the connector 360° to distribute LOKPREP evenly. D EVELOPED FOR THE AEROSPACE INDUSTRY , the patented LOKRING System has been field-proven in millions of refrigeration and air-conditioning installations since the 1970s.
LOKPREP 65G a 15ml VULKAN LOKRING Rohrverbindungen GmbH + Co. KG Heerstr. 66 44653 Herne/Germany Postfach 20 04 68 44634 Herne/Germany +49 (0) 23 25/9 22-0 +49 (0) 23 25/5 12 22 LOKPREP 65G a 15ml
Advices for fire and explosion protection n.a. Storage Store product in original container, do not return product remainders into the original container; store between a temperature of +6°C - +22°C. Advice for storage combinations n.a. VbF class n.a. Revision 08.06.99 Page 2 of 5 Lokprep 61.doc
Onto the outer wall of the cleaned tube ends LOKPREP has to be applied until there is a thin film on and around the tube which is inserted into the LOKRING union joint.
STEP 02 | APPLY LOKPREP Next; moisten the whole tube circumference with LOKPREP by guiding the bottle 360° around the outside of the tube. Apply the LOKPREP a little away from the cut edge to prevent it getting onto the inside of the tube.
Lokring® connections and Lokprep™ sealer both will glow a blue green color under UV or a black light. This is a normal condition and is not an indica‐
Place Lokring over tube to internal stop and rotate tube or Lokring to distribute Lokprep. 6. Using appropriate jaws and Lokring assembly tool, push the 1 st ring onto the Lokring body until fully seated to stop.
LOKRINGS LOKPREP FERRAMENTA 1 2 A conexão de tubos com Lokring pode ser feita com facilidade. Somente é necessário a conexão Lokring, ferramenta manual de montagem e o Vedante Lokprep.
LOKPREP L0W-TEMPERATURE (LT) AND HIGH-TEMPERATURE (HT) Metal tubes can have longitudinal grooves on the surface from production. These production-related faults can be compensated quite easily by wetting the tube ends to be connected with LOKPREP fluid before assembly.
Other sites you could try:
Find videos related to Lokprep