Aci 347

Guide for Shoring/Reshoring of Concrete Multistory Buildings

347.2R-2 ACI COMMITTEE REPORT CHAPTER 1—INTRODUCTION In multistory cast-in-place concrete building construction, freshly cast floors are placed on formwork that is temporarily supported by a system of shores and reshores until the concrete has the ability to be self-supporting.

www.gamcoform.com

Tolerances in Concrete Construction

ACI 347 permitted a tolerance of 1/16 inch per foot (3) in the slope of a floor but the investigators concluded that a more realistic tolerance might be TOLERANCES SUGGESTED BY ACI FOR REINFORCED CONCRETE BUILDINGS* ...

www.awci.org

- Guide to Formwork for Concrete.

ACI 347-04 - Guide to Formwork for Concrete. C. American Forest and Paper Association: 1. AF&PA -National Design Specifications for Wood Construction. D.

onlineplanroom.docucopyllc.com

347-01 Guide to Formwork for Concrete

347-2 ACI STANDARD 3.7—Removal of forms and supports 3.8—Shoring and reshoring of multistory structures Chapter 4—Materials, p. 347-16 4.1—General 4.2—Properties of materials 4.3—Accessories 4.4—Form coatings and release agents Chapter 5—Architectural concrete, p. 347-17 5.1 ...

www.bpesol.com

347-04 Guide to Formwork for Concrete

347-2 ACI STANDARD 4.2—Properties of materials 4.3—Accessories 4.4—Form coatings and release agents Chapter 5—Architectural concrete, p. 347-18 5.1—Introduction 5.2—Role of the architect 5.3—Materials and accessories 5.4—Design 5.5—Construction 5.6—Form removal Chapter 6 ...

carlospalomino.design.officelive.com

PART 1 - GENERAL

PART 3 - EXECUTION 03030 - 3.1 FABRICATION A. Use forms that conform to ACI 347. Fabricate with facing materials that produce the specified tolerance requirements of ACI Special Publication No. 4, ...

www.hillsboroughcounty.org

Concept to Completion - Form Specifications

... slab construction shall not exceed those listed for Class C in Section 3.4 of Guide to Formwork for Concrete, published by ACI, (formerly Section 3.3.8 of ACI 347-78, ...

www.cecoconcrete.com

03 11 00 - Concrete Forming

ACI 347 Formwork for Concrete. CONCRETE FORMING RELEASE - R2.0 SECTION 03 11 00 BART FACILITIES STANDARDS Issued: 09/30/2008 PAGE 2 OF 10 STANDARD SPECIFICATIONS B. American Plywood Association (APA): 1.

www.bart.gov

STANDARD SPECIFICATIONS

Formwork: ACI 347 with materials suitable for use intended and adequate to support loads within tolerances as recommended. G. Aggregates: ASTM C33. H.

www.wsscwater.com

SP-4 Formwork for Concrete

Formwork for Concrete By M. K. Hurd SP-4-1 Prepared with review and guidance of ACI Committee 347, Formwork for Concrete The sixth edition ofFormwork for Concrete, SP-4 was published in 1995.

civilwares.free.fr

Other sites you could try:

Find videos related to Aci 347